Menu

Cargo hold & Tank Cleaning

Cargo hold cleaning Video Using Aquafoam T 15-30% solution

Smart Coat Plus

ID: 721-302x

Product description

Smart-coat plus formulated thin film barrier between the cargo and the cargo hold surfaces making the cleaning operation after unloading quicker and easier. Smart-coat plus is safe to environment and to the personnel handling it, and will not contaminant the cargo. It is non-corrosive and safe on all coating. Smart coat plus is ideal for coating cargo hold surface when load acidity cargo.

Features and benefits

  • Water base cargo hold barrier-easily remove by water
  • Save cleaning time and cleaning chemical
  • Easy to apply
  • Free from hydrocarbon solvents
  • Provide temporary protection against corrosion
  • Ideal cleaning after coal, pet coke and other difficult cargoes
  • Completely safe on all coating
  • Special design for acid cargo

CAP Cement remover

ID: 721-201x

Product description

CAP cement remover is for cleaning and removing masonry splatters and excess cement and mortar stain from floor or wall and mosaics; rust and masonry splatters from metal formworks; cement truck and mixers etc.

Do not use on marble, some granites and soft lime stones.

Features and benefits

  • can be applied to all acid-resistant materials
  • extremely effective when it comes to removing inorganic dirt and saline efflorescenc
  • concentrated acid-based cleaner

CAP Uni green

ID: 721-104x

Product description

CAP Uni green is a pH-neutral, liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. CAP Uni green is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate.

Features and benefits

  • Non-caustic, pH neutral
  • Solvent free
  • Non-flammable
  • Not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Non-corrosive to metals
  • Suitable for all tank-coatings
  • Can be used for gas and hydrocarbon-freeing of tanks

CAP Tar cleaner

ID: 721-007x

Product description

CAP Tar cleaner is a concentrated, heavy-duty solvent based cleaner and degreaser. It is particularly effective as a spot cleaner on stubborn deposits as dried tars and bitumen on tank walls.

Features and benefits

  • Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties, can also be used for the removal of tars, bitumen and similar difficult tank contamination’s.
  • The emulsifying agents in this product are biological degradable.
  • Easy rinse off, leaving clean and oil-free surfaces and safe to use on most metal surfaces, painted surfaces and tank coatings.
  • Saves time through quick action.
  • Reduces the number of products needed as the product work both as spot and re-circulation cleaner.

CAP Tank wax remover

ID: 720-903x

Product description

CAP Tank wax remover is a powerful cleaner based on alkaline materials combined with a special blend of surfactants. Its complex formulation makes it suitable for numerous tank cleaning operations onboard. Tank wax remover is free of hydrocarbon solvents and is biodegradable. Tank wax remover is ideal for the removal of soot from Inert Gas Systems (IGS) and cleaning of cargo tanks after petroleum waxes and related products. Tank wax remover can also be used for tank cleaning after vegetable and animal oils including fish oil and applications where an alkaline cleaner is required. Tank wax remover should not be used on zinc coatings.

Features and benefits

  • Heavy duty water based tank cleaner
  • Not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Free from hydrocarbon solvents
  • It has numerous tank cleaning applications including removal of natural oils and fats
  • Ideal for cleaning after wax deposits
  • Suitable for removal of soot deposits from inert gas systems
  • Completely safe on epoxy coatings

CAP Tank bright

ID: 720-802x

Product description

Concentrated acidic cleaner containing phosphoric acid and non-ionic surfactants. CAP Tank bright is formulated for effective removal of white residues from epoxy-coatings remaining after carriage of fatty acids as well as stains removal and to upgrade coated cargo tanks.

Features and benefits

  • Solvent-free
  • Odourless
  • Not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Non-flammable
  • Economical in use

CAP Tank green

ID: 720-709x

Product description

CAP Tank green is a micro emulsion water based tank cleaner. This product is low toxic, biodegradable and safe to use. It contains natural solvents linked with easily biodegradable surfactants. Main application is for hydrocarbon freeing but it may also be used for other tank cleaning purposes where a strong degreasing effect is required.

Features and benefits

  • Water-based degreaser
  • Not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Low-toxic
  • Non-flammable
  • Micro emulsion based formulation
  • Helps with rapid hydrocarbon freeing of tanks

CAP Multi purpose degreaser

ID: 720-607x

Product description

CAP Multi purpose degreaser is a modern low-toxic, biodegradable solvent based product. It meets IMO’s requirements regarding safety and pollution hazards of chemicals. This product is excellent as a tank cleaner and degreaser.

Features and benefits

  • The emulsifying agents in this product are biodegradable.
  • Not contain nonylphenol ethoxylates or other estrogenic compounds.
  • Can be used for a wide range of applications.
  • Can be used for cleaning and gas-freeing of double bottom, deep, and fuel oil tanks at sea.
  • Can also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
  • Can be used for degreasing and cleaning of bilge spaces and engine rooms.
  • Safe to use on most metal surfaces, painted surfaces and tank coatings.
  • Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties.
  • Easy rinse off, leaving clean and oil-free surfaces.

Alkaline green

ID: 720-504x

Product description

Non-caustic water based alkaline cleaner, containing corrosion inhibitors to prevent the corrosion of metals such as zinc, aluminium, copper, brass and tin. Alkaline green minimizes the hazards in handling caustic based materials.

Features and benefits

  • Non-caustic
    • Non-flammable
    • Not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Non-corrosive to ferrous metals
  • Suitable for all tank-coatings
  • Can be used for gas and hydrocarbon-freeing of tanks

Smart Kleen

ID: 720-403x

Product description

Smart Kleen is a heavy duty water based alkaline tank cleaner, containing natural based detergents. It is a powerful cleaner for cleaning of cargo tanks after discharge of drying, semi-drying and non-drying natural oils and fats. Smart Kleen can be used for tank sanitising and deodorising prior to changing to foodstuffs. To achieve the high standard of cleanliness required, a final wash will be necessary by using this product. For zinc silicate coatings use Alkaline green.

Features and benefits

  • The emulsifying agents are biodegradable
  • Non-flammable
  • Non-corrosive to ferrous metals and epoxy coatings
  • Rapid penetration and emulsification of vegetable, animal, and fish oils with rapid rinsing
  • Removes hardened oxidised oil and grease deposits and can be used as heavy duty cargo tank cleaner following discharge of drying, semi-drying and non-drying natural oils and fats
  • Can be used for hydrocarbon freeing of cargo tanks

Metal-brite

ID: 720-302x

Product description

Liquid detergent compound containing phosphoric acid and non-ionic surfactants, used for rust removal, rust strains and as a surface brightener.

Features and benefits

  • not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Non-flammable
  • Removes tarnish from non-ferrous metals
  • Surface brightening including aluminium
  • Can be remove rust from painted, ceramic and wooden surfaces
  • Economical in use

Aqua-Foam

ID: 720-203x

Product description

Aqua-foam is a heavy duty alkaline cleaner with good foaming qualities specially formulated for cleaning cargo holds on bulk carriers and OBOs. The dense foam created prevents the cleaning solution from running off vertical surfaces and thereby enhances the cleaning efficiency. It is containing only biodegradable ingredients. Aqua-foam is specially developed for cargo hold cleaning, but may also be used for other cleaning applications.

Features and benefits

  • Biodegradable
  • Free from hydrocarbon solvents
  • Not contain nonyl phenol ethoxylates or other estrogenic compounds
  • Safe on epoxy coatings
  • Ideal cleaning after coal, pet coke and other difficult cargoes

Smart-coat

ID: 720-104x

Product description

Smart-coat formulated thin film barrier between the cargo and the cargo hold surfaces making the cleaning operation after unloading quicker and easier. Smart-coat is safe to environment and to the personnel handling it, and will not contaminant the cargo. It is non-corrosive and safe on all coating

Features and benefits

  • Water base cargo hold barrier-easily remove by water
  • Save cleaning time and cleaning chemical
  • Easy to apply
  • Free from hydrocarbon solvents
  • Provide temporary protection against corrosion
  • Ideal cleaning after coal, pet coke and other difficult cargoes
  • Completely safe on all coating